How to Flash Stock Rom using Smart Phone Flash Tool (SP Flash Tool)

These are the instructions to Flash Stock ROM on Mediatek Devices using the Smart Phone Flash Tool (SP Flash Tool) on Windows Computer.
Requirements: Your Mediatek Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash Stock ROM using Smart Phone Flash Tool (SP Flash Tool)

Step 1: Download and install Android CDC Driver on your computer. In case Android CDC Driver is already installed on the computer then SKIP this step.

Step 2: Download the Stock ROM of your Mediatek Device and extract it on the computer (you can find Stock ROM on FirmwareFile or through Google).

Step 3: Download and Extract SP Flash Tool on the Computer. Once SP Flash Tool is extracted, you will be able to see the following files:

Step 4: Now, Open flash_tool.exe to launch the tool.

Step 5: Once SP Flash Tool is launched, Click on the Scatter-Loading Button.

Step 6: Now, Locate the Scatter File (you can find the scatter file in the Stock ROM of your device).

Step 7: Now, Untick the Preloader option (flashing the preloader.bin can brick the device).

Step 8: Click on the Download Button to Begin the Flashing Process.

Step 9: Connect your Mediatek Device to the Computer using the USB Cable (make sure it is power off). After connecting the device to the computer Press Volume Down or Volume Up key, so that SP Flash Tool can detect the device.

Step 10: Once the Computer detects your Device, the Flashing process will Start Automatically.

Step 11: Once Flashing Process is completed, a Green Ring will appear at the End.

Keep in mind:
[*] Caution: We do not recommend you to flash the preloader.bin file using the SP Flash Tool as it may brick the device. Therefore, always untick the preloader.bin option before starting the flashing process.